Steris VHP X10, Operator'S Manual

Page: 24 / 50

3-4
10087252 Operator Manual Operating Instructions
6. Attach Sash Plate Assembly to Enclosure.
7. Attach Exhaust Plenum Adapter to Enclosure.
8. Connect hoses from VHP X10 Biodecontamination Unit to
Enclosure (see
Figure 3-4 ). Follow labels on Biodecontamination
Unit.
Figure 3-4. Connect Biodecontamination Unit to Enclosure
3.2.2 Prepare Enclosure and
Biodecontamination Unit
The following information is intended to enable a Trained and Certified
Applicator to properly set-up the Biodecontamination Unit and prepare
the Enclosure (refer to
S
ECTION
2.1, T
ERMS AND
D
EFINITIONS
):
1. Per FMP*, make all necessary preparations to Enclosure. Verify
CIs and BIs are placed inside Enclosure as required.
*Guidance for developing a suitable Fumigation
Management Plan can be found in STERIS
publication (P129383-938) or searching EPA
website (epa.gov) for the key words ’Vaprox
Package Insert.’
2. Wearing proper PPE, unpack desiccant cartridge and Vaprox 59
Sterilant Cup from packaging (see
Figure 3-5 ).
3. Ensure Sterilant Cup is not expired.
4. Plug Biodecontamination Unit power cord into proper facility
outlet (120 Vac, 20A or 230 Vac, 10A; single source circuit).
5. Turn Biodecontamination Unit power ON,
6. Use Arrow Keys to highlight SELECT CYCLE on display. Press
Start button to continue.
7. Use Arrow Keys to highlight desired cycle on display. Press
Start button to continue.
8. If cycle option asks, set date and time.
9. If cycle option asks, select language.
10. Follow screen prompt, open door and insert Sterilant Cup and
desiccant cartridge into unit (see Figure 3-5 ).
NOTE: Refer to S
ECTION
6.6, S
TERILANT
C
UP
I
NSTALLATION AND
R
EMOVAL
, and S
ECTION
6.7, D
ESICCANT
I
NSTALLATION AND
R
EMOVAL
, for more information of desiccant cartridge and
Sterilant Cup insertion.
11. Follow screen prompt, press Start .
To Sash Plate
Assembly
To Exhaust Plenum
Adapter
Supply Door
Fastening Screws