Steris HarmonyAIR G Series, Operator'S Manual

Page: 43 / 60

4-1
Cleaning The Equipment Operator Manual 10043124
4.1 Cleaning Equipment STERIS recommends the following equipment for use when cleaning
the HarmonyAIR™ Surgical Lighting System G Series:
• Pail
• Sponge
• Cloth Wipes
• Rubber Gloves
• Mild Household Detergent (e.g., Dishwashing Liquid)
• Coverage
®
Plus Germicidal Surface Wipes Disinfecting /
Deodorizing / Cleaning Wipes (Available from STERIS. Do not
use wipes from other manufacturers.)
• Coverage
®
Spray HB Plus Ready-To-Use One Step Disinfectant
(available from STERIS)
• Coverage
®
Spray TB Plus Ready-To-Use Disinfectant Cleaner
(available from STERIS)
WARNING – PERSONAL INJURY
and/or POSSIBLE EQUIPMENT
DAMAGE HAZARD: Do not attempt
to clean lighthead unless power is
turned off and the lighthead has
cooled sufficiently.
CAUTION – POSSIBLE EQUIPMENT
DAMAGE HAZARD:
• Cleaning and disinfecting
agents used on this lighting
system must be certified by their
manufacturer to be compatible
with the following materials:
polycarbonate, polyetherimide,
santoprene.
• DO NOT SPRAY any cleaning
product directly onto the
lighthead, modem chassis, or
any system components.
• Use only recommended
cleaning/disinfecting and/or
anti-static agents on this light.
Staining, pitting and/or
discoloration could occur if a
phenolic-based, iodophor-
based, or glutaraldehyde-based
disinfectant is used on the
surfaces of this light. Also, use
of alcohol or aerosol spray
cleaner/disinfectants containing
a substantial amount of alcohol
in the formula can damage the
polycarbonate lens.
• Do not scratch the lens when
cleaning; always wear rubber
gloves and use only a clean,
white, lint-free cloth when
wiping external surfaces.
• Prevent leakage of fluids into
interior of lighthead or wall
control. Any such leakage could
impair or damage the lighting
system.
• Do not use floor cleaners on this
equipment.
!
!
CLEANING THE EQUIPMENT
4