Steris HarmonyAIR G Series, Operator'S Manual

Page: 39 / 60

3-15
Operating Instructions Operator Manual 10043124
Brigh
tness –
Use this function to affect the overall brightness (or
darkness) of the video image. Brightness control can be set to adjust
itself automatically.
Auto Brightnes
s –
Use this setting to allow the camera’s
electronic controls to automatically adjust the brightness level.
Manual Brightnes
s –
Use this setting to manually adjust the
brightness setting when the automatic controls do not provide an
acceptable image. (Refer to
Table 3-3 )
Table 3-3 summarizes the brightness and focus controls available to
the operator.
Table 3-3. Brightness and Focus Mode Summary
Brightness/
Focus
Mode
Brightness/
Focus LED
Indicator
Switch
Pressed
Operation
Auto ON
-
(Brightness or
Focus)
• Mode switched to Manual.
• Mode LED indicator turned OFF.
• The camera brightness decreases as long
as the
-
brightness switch is pressed.
• Brightness or focus decreases stop when
the camera reaches its internal lower limit.
Auto ON
+
Brightness or
Focus
• Mode switched to Manual.
• Mode LED indicator turned OFF.
• The camera brightness or focus increases
as long as the
+
brightness switch is
pressed.
• Brightness or focus increases stop when the
camera reaches its internal upper limit.
Auto ON
+
and
-
Brightness or
Focus
• Mode remains in Automatic.
Manual OFF
+
Brightness or
Focus
• The camera brightness or focus increases
as long as the
+
switch is pressed.
• Brightness or focus increases stop when the
camera reaches its internal upper limit.
Manual OFF
-
Brightness
or Focus
• The camera brightness or focus decreases
as long as the
-
switch is pressed.
• Brightness or focus decreases stop when
the camera reaches its internal lower limit.
Manual OFF
+
and
-
Brightness or
Focus
• Mode switched to automatic.
• Camera automatically adjusts brightness or
focus.
• Mode LED indicator turned ON.