Steris HarmonyAIR G Series, Operator'S Manual

Page: 27 / 60

3-3
Operating Instructions Operator Manual 10043124
3. At the wall control press and hold the - button until the light goes
out.
NOTE: For longer module life, use lowest intensity level suitable
for surgical procedure.
3.1.3 Surgeon's Intensity
Control Buttons
Refer to Figure 3-2 .
1. Grasp the handle of the appropriate lighthead. A ring of
membrane buttons (bumps) are located on the control bezel
adjacent to the lighthead lens.
2. Press any of the surgeon's intensity control buttons molded with
+ symbols to increase the lighthead intensity. Press any of the
surgeon's control buttons molded with - symbols to decrease
lighthead intensity.
3. To turn lighthead OFF, press and hold any of the - membrane
buttons until the light goes out.
Figure 3-2. G5 Lighthead