4-9
Operating Instructions
Operator Manual
920017-148
IMPORTANT:
If the manifolded Bottle Washing Cart is used, assure Floor Tilting
option IS NOT ACTIVATED in the wash chamber where it is positioned (see
Section 5,
Cycle and Control Value Programming).
1.
When doors are open, roll correctly loaded Bottle Washing Cart (see
Figure 4-4) or Universal Cage and Pan Wash Cart (see Figure 4-5) along
guiding rails.
2.
Push until wheels are positioned between stoppers on rails.
3.
Assure water inlet connector at bottom of wash chamber is aligned with
manifold on bottle washing cart.
Figure 4-4. Bottle Washing Cart
4.4.4 How to Load
Bottle Washing Cart or
Universal Cage and Pan
Wash Cart (Accessory)
Figure 4-5. Universal Cage and Pan
Wash Cart
CAUTION – POSSIBLE
EQUIPMENT DAMAGE:
•
Always position mani-
folded Bottle Washing Cart
and/or Central Header
Manifold over central wa-
ter inlet connector. If mani-
folded accessory is not
positioned correctly, dam-
age may result and unit
will be unable to effectively
wash load.
•
Do not process load using
Central Header Manifold
or Bottle Washing Cart in a
chamber where Automatic
Floor Tilting option is ac-
tivated. If Automatic Floor
Tilting is used, manifolded
water inlet and washer will
be damaged.
