5
5-1
Cycle Programming
Operator Manual
122997-341
5.1 Program Touch
Pads
Microcomputer control of
Basil
®
4600 Cage and Rack Washer
and
Basil
®
4602 Cage and Rack Washer
allow adjustment of previously
programmed cycles to process different types of loads. All program
changes are made using program touch pads on washer control
panel (see Figure 5-1).
Program touch pads function as follows:
•
CHANGE VALUES touch pad –
press to access Change Values
mode.
•
CURSOR (left or right) touch pad
– press until item to be
changed (word, letter, or number) flashes.
•
VALUE (up or down) touch pad –
depending on item flashing
(selected), press to either toggle between answer selections or
scroll through alphabet and numbers 0 through 9.
NOTE: Alphabet includes characters for an underline (_) and a
space ( ).
•
SAVE VALUES touch pad
– press to save changes made, exit
Change Values mode and return screen to cycle menu.
5.2 Change Values
Mode
Change Values mode allows authorized operators to change both
cycle values and general operating values. In Change Values mode,
cycles may be altered and saved as custom cycle programs to meet
specific washing needs. See
Table 5-1, C
YCLE
D
ESCRIPTION
C
HART
,
for programmable values accessible through Change Values mode.
Figure 5-1. Program Touch Pads
CYCLE PROGRAMMING
