Stereoboomm Nachtwacht, Manual

Page: 4 / 20

3. Volume up / Next track / Next radio station
Blu SD/TF mode
• Press shortly to increase the volume.
• Press 2-3 seconds to go to the next track.
FM radio mode
• Press shortly to increase the volume.
• Press 2-3 seconds to go to the next radio station.
4. Volume down / Previous track / Previous radio
station
Blu SD/TF mode
• Press shortly to decrease the volume.
• Press 2-3 seconds to go to the previous track.
FM radio mode
• Press shortly to decrease the volume.
• Press 2-3 seconds to go to the previous radio station.
5. Micro SD/TF card slot
6. Micro USB Charging slot: Insert the Micro USB
cable into this slot to charge your headphone.
7. AUX in: Insert the AUX-in cable to use the
headphone with a non-Bluetooth device.
8. LED indicator
9. Microphone
LED STATUS
Power on/standby: blue LED on
Bluetooth mode: blue LED on
Radio mode: green LED on
Micro sd/tf mode: green LED flashes every 4 sec.
Aux-in mode: all LEDs off
Pairing: blue & green LED flashing
alternately
Power off: blue LED off
Charging: red LED, continuously
Charging ready: red LED off
CHARGING THE BATTERY
! Attention: We strongly recommend to fully charge
the headphone before the first use.
1.
Plug the micro USB cable into the micro USB
charging slot (6). Plug the other end of the micro
USB cable into your computer or other USB
charging dock.
2.
The LED indicator (8) will light up RED and your
headphone will be charging.
3.
When the battery is fully charged the LED indicator
will go out.
This headphone offers up to 4h of wireless music.
Music time may vary from usage (volume). If your
battery is empty you can still use the headphone with
the AUX-in cable.
Note: If the headphone has not been connected to a
music device for 5 minutes, it will switch off automatically
to save power.