24
GENERAL RECOMMENDATIONS
Aim the microphone toward the audio source and stay away of the unwished sources.
Close to the microphone to get more low frequencies.
Use only a microphone to capture one sound source.
Stay away the microphone from the reflective surfaces.
Avoid excessive manipulation to reduce the noises and vibrations.
Don’t cover the grill with your hand.
TROUBLESHOOTING
No sound / Weak sound
-Verify the connections.
-Turn on the mic and receiver.
-Be sure that the batteries are co-
rrectly installed.
-Be sure that the receiver and the
microphone are in the same channel
and group.
-Verify the volume level in the audio
device.
-Verify the volume level in the recei-
ver.
Noise or intermittent audio
-Remove all RF interference sources
nearby.
-Replace the batteries.
-Adjust the mute.
Summary of Contents for WR-2000 UHF
