Instruction manual
VHF WIRELESS
MICROPHONE SYSTEM
1
3
2
4
Before to turn on the device, make sure that the volume of the microphones
are at the minimum level. Strong sounds can cause hearing damages.
Receiver
Input: 12 V - - - 1 A
Frequency range: 220 - 268 MHz
Sensitivity: -92 dBm
Frequency response: 70 Hz - 16 KHz +/- 3 dB
Dynamic range: > 90 dB
AC/DC converter
Input: 100 - 240 V~ 50/60 Hz 8 W
Output: 12 V - - - 1 A
MIXOUT
DC INPUT
12-15 VDC
MIXOUT
DC INPUT
12-15 VDC
MIXOUT
DC INPUT
12-15 VDC
CONTENT
PARTS
PLACING BATTERIES
MICROPHONE
Connect the receiver into a sound system, mixer or amplifier using the 6.3 to 6.3 mm
cable.
Connect the power adapter into the receiver and to an electrical outlet.
Turn on the receiver.
Specifications may vary without previous notice.
After placing the batteries in the microphones, turn them on and start using them. Adjust
the volume gradually with the receiver knobs.
IMPORTANT
HOW TO USE
SPECIFICATIONS
WARRANTY
Read these manual to avoid any damage.
The instructions of these manual are for reference about the product.
There may be differences due to update.
Please check our web site www.steren.com to obtain the latest version of the instruction manual.
CAUTIONS
• This product is NOT a toy; keep it away from children.
• Do not use or store this device in dripping or splashing places.
• Do not knock or let drop microphones.
• Always use a soft, clean and dry cloth to clean the product.
• Do not use the microphones in conditions of dust or moisture, excessive heat, near heat sources or
mechanical vibrations.
ON
OFF
BATT
LOW
ON
OFF
BAT
T LO
W
Receiver
Grill
Receiving
telescopic
antennas
Power On LED
indicator
(receiver)
ON/OFF
Power On
LED indicators
(microphone)
Signal audio
LED indicator
Volume
control
for Microphone 1
Compartment
cover
ON/OFF switch
LED indicator (low battery)
Microphones
Power adapter
6.3 to 6.3 mm cable
RECEIVER
ON
OFF
BATT LOW
X2
ON
OFF
BATT LOW
Mix out
Power
adapter
input
ON
OFF
BATT LOW
1
Remove cover.
2
Insert 2 type "AA"
batteries.
Be sure to place the
polarity correctly
3
Place the cover and close.
Microphone
Input: 3 V - - - (2 x AA)
Frequency range: 220 – 268 MHz
Stability: 50 PPM (-10 – 50°C)
Transmission power: 10 dBm
Maximum input level: 0 dBV
Operating temperature: -10 - 50 °C
Battery life: > 6 hours
Dimensions: 265 x 56 x 56 mm
Product: VHF Wireless microphone system
Part number: WR-055
Brand: Steren
01 800 500 9000
Volume
control
for Microphone 2
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year on the other
parts from the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge. The supplier will pay for transportation charges.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair
by unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Serial number ________________________________________
Product ______________________________________________
Batteries compartment
Frequency change
ON
OFF
BATT LOW
ON
OFF
BATT LOW
If there are interference, press the frequency change button until you get a better signal
WR-055
V1.
2
0
219
m
SYNCHRONIZATION OF MICROPHONES
ON
OFF
BATT LOW
1
2
3
1.- Press button 3, without releasing it turn on the
microphone by sliding switch 2 from OFF to ON. LED 1 will
flash, this means that the transmitter (microphone) is
activated for the synchronization mode.
2.- Turn on the receiver, the LED indicator
o
f the receiver
will flash 3 times.
3.- Turn off the microphone and turn it on again, it must be
synchronized and ready for use.
In case you miss the synchronization of the microphones with the
receiver, follow the following steps:
ELECTRÓNICA STEREN S.A. DE C.V.
Biólogo Maximino Martínez No. 3408, San Salvador Xochimanca, Del. Azcapotzalco Ciudad de México 02870, RFC: EST850628-K51
STEREN PRODUCTO EMPACADO S.A. DE C.V
.
Autopista México-Querétaro. Km 26.5 Sin número, Nave Industrial 3-A, Col. Lomas de Boulevares, Tlalnepantla de Baz, Estado de México, C.P.
54020, RFC: SPE-941215-H43
Customer Care Center
