One Time Mode Synchronization
NOTE: This mode temporarily removes the
Standard Mode synchronization setup for
all remotes until the power of the console is
turned off. When the power is turned back
on again, the Standard Mode settings will
return.
1. Press the HOME Button on a remote that
is synchronized with the console.
2. Select the Remote Settings option from
the Home Button menu, then select the
Reconnect option.
3. Press the 1 and 2 Buttons
simultaneously on the remote that you want
to synchronize with the console.
4. The Player LEDs will blink during the
syncing process. When the blinking stops,
the connection is complete. See diagram at
right for a description of what the blinking
indicates.
Summary of Contents for VGA-250
