Product: 36 tones wireless double door bell
Part number: TIM-300
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center.
01 800 500 9000
I M P O R T A N T
The instructions of this manual are for reference about the product. There may
be differences due to updates.
Please check our website (www.steren.com) to obtain the latest version of the
instruction manual.
Before using your new Steren´s product, please read this instruction manual to prevent any
damage.
Product design and specifications are subject to change without notice.
C A U T I O N S
•
Install the device in a dry place.
•
Place the transmitter with the release tab down to prevent moisture.
•
Clean with a soft, dry cloth.
•
Do not try to open the device, it may cause damages and void the warranty.
•
Do not expose to extreme temperatures.
C O N T R O L S
Bells
1. Speaker
2. Ringtones
3. Volume
4. Battery compartment
B A T T E R Y I N S T A L L A T I O N
Bells
1. Remove the cover from the battery compartment located in the back part and place 2 AA type
batteries paying attention to polarity.
Transmitter
1. Ring button
2. Release tab
3. Battery compartment
Transmitter
1. Remove the cover from the battery compartment using
a screwdriver.
H I G H L I G H T S
High technology wireless door bell. It has a wide range of transmission (up to 50 m without obstacles)
and can be programmed on 36 different tones.
The door bells use 2 batteries AA type each one. The transmitter is designed for outdoors use and
works with a 23 A type battery. It has a low consume and high performance electronic circuit. Forget
about wiring and wall breakings to install.
Manufactured in white color plastic.
2. Place one 23 A type battery paying attention to polarity. Place the cover again.
I N S T A L L A T I O N
1. Clean the surface where you want to place the transmitter.
2. Remove one of the protectors of the sticker and stick it on the desired surface. Press it slightly.
H O W T O U S E
1. To select one of the 36 ringtones, press the ringtone button repeatedly until you find the desired
tone.
2. To adjust the volume level, press the volume button repeatedly.
3. To start using the transmitter and the bells press the ring button.
S P E C I F I C A T I O N S
Door bell
Input: 3 V (2xAA)
Dimensions: 75 x 100 x 30 mm
Transmitter
Input: 12 V (1 x3/4 AAA) 1 battery 23 A type (included)
Dimensions: 77 x 44 x 22 mm
3. Once the sponge has been placed firmly on the surface, remove the second protector.
4. Place the door bell over the sponge and press slightly.
5. To hang the bells, select their location, install the screws and hang them.
