Steren TEL-2480, Instruction Manual

Page: 56 / 67

22
TAM ON / OFF
Enter TAM SETTINGS and use or to select TAM ON/OFF submenu.
Press to confirm. Use or to select ON or OFF. If you select ON, the
screen will show OGM1. Use or to select OGM1 or OGM2.
OGM1: If you select OGM1, when there is an unanswered incoming call, the
recorded message will play followed by a beep. After that, the caller will record
an up to 2 minute message. The recording will stop if silence, busy or continuous
tone is detected.
OGM2: If you select OGM1, when there is an unanswered incoming call, the
recorded message will play but the caller cannot record a message.
SET OGM
Enter TAM SETTINGS and use or to select SET OGM submenu. Press
. Use or to select OGM1 or OGM2 and to confirm. You can select
PLAY, RECORD, or DEFAULT using or and to confirm.
PLAY: Use this option to hear the recorded OGM.
RECORD: You can record a new OGM using this option. The message can be
up to 60 seconds long and you can stop the recording by pressing again.
DEFAULT: Select to use the pre-recorded message.