ENGLISH
ENGLISH-04
INSTALATION
Decide where you want to place the switch. Find a fl at horizontal
surface such as a table, desk or shelf. The switch comes with a
wall-mounting screws to place it vertically.
Make sure the selected location is:
- Not in direct sunlight
- Not near a heater or heating vent
- Not cluttered or crowded. There should be at least 2 inches
of clear space on all sides of the switch.
- Well ventilated
Also, you’ll need a Category 5 (Cat 5) Ethernet cable with RJ45
connectors for each device you want to connect into the switch. Each
Ethernet cable must be smaller than 328 feet.
1.- Place the switch on a fl at surface or hook onto the screws.
2.- For each device, insert one end of an Ethernet cable into the port in
the device and insert the other end into one of the Ethernet ports on the
switch.
3.- Connect the power’s adapter cord into the switch and then plug the
adapter into an AC household outlet. The Power light should light up.
The corresponding port number for each connected and powered
device should light and fl ash when activity occurs.
