STV-039
37” TO 70” STAND
V2.1
1018m
Before using the product, read this instruction carefully to avoid any malfunction.
The information presented serves only as a reference for the product. Due to updates there may be differences.
Instruction manual
CONTENT
STAND INSTALLATION
Holder
x1
Fastening bars
(Not included)
x2
SCREWS, WASHERS AND ANCHORS KIT
PIECES
x4
x4
x4
x2
x4
x4
x4
M8x16
A
M6x16
E
REQUIRED TOOLS FOR
INSTALLATION
M8x16
B
2”1/8
C
M6x15
D
M6x45
F
Steren is not responsible for damage and injury caused by improper use or improper installation. It is your responsibility to ensure proper installation and
use of the product, and its periodic review.
2”
G
TV SCREEN INSTALLATION
Drilling mark
Drill
a) On concrete
When drilling, be careful that there are no hidden pipes with electrical wiring, gas or water .
Use a leveler and the holder as a template for drilling marks on the surface where you want to install the wall mount.
Level
1
2
Install
3
C
G
C
b) On wood
Drilling mark
Drill
1
2
Install
3
C
C
• Choose a solid and smooth wall to securely fix the stand.
• Do not over tighten the screws.
• This product is designed for indoor use; using it outdoors could cause personal injuries and failures.
• Avoid falling device, as it could be damaged.
• Do not exceed of 40 kg maximum weight capacity.
• This device is not intended for use by people (including children), whose physical, sensory or mental abilities are
different or reduced, or who lack experience or knowledge.
• Children should be supervised to ensure they do not use the device as a toy.
CAUTIONS
Place the fastening bars on the back of the screen and choose 4 screws and washers to fix them.
1
The supplied screws are standard measures. It is
recommended to consult the manual of your TV
screen to get information about the necessary
screws for mounting on a support.
Fix the fastening bars by
tightening the safety screw.
Install the screen on the stand.
Adjust the angle of vision and press
the locks again.
F
F
2
4
B o D
A o E
3