Product: 37” LED TV stand
Part number: STV-031
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was received.
4.- Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please give a call to our Call Center.
01 800 500 9000
Before using your new Steren´s product, please read this instruction
manual to prevent any damage.
C A U T I O N S
H I G H L I G H T S
F I N A L A S S E M B L Y
C O N T E N T
I N S T R U C T I O N S
I M P O R T A N T
• During assembly, use only the parts supplied and attach them firmly.
• Do not miss any piece during assembly. Install all parts as directed.
• Do not alter or modify any part.
• After installation, make sure the unit is firmly attached.
VESA 200x200, 200x100, 100x100),compatible stand, it has a compact size and is highly resistant
to support LCD or LED screens, up to 37” and 88 lb.
It has a secure to avoid the screen releases from the stand after installation. Manufactured in steel,
black finished. All required fittings are included for installation.
1. Locate the place where you want to install the stand.
2. Place the wall plate over the wall, and mark where
you need to drill holes for a secure installation.
3. Once you made the holes, insert anchors “D” in
each one.
A) Back panel (1)
E) Screws
M4*14 (4)
M5*14 (4)
M6*14 (4)
F) M6*190 locking bolt (2)
G) M6 (4): Washer
B) Arm (2)
C) Tapping screw (4)
D) Wall anchor (4)
4. Place the support plaque and insert the screws
“C” with the washers (“G”) in the corresponding wall
anchors, ensuring that the plaque is secure.
5. Place the arms on the back part of your screen.
6. When the screen is securely mounted in the
fastening bars, hook it up to the steel bar.
Note the hook must be placed in the upper side of
the plate.
7. To set the arms to the plate place two screws
“F” as shown in the image and tighten firmly.
8. To set a better angle of the screen, insert the holders into the
holes located at the bottom of the the arms.
Depending on your screen’s size, use “E”
screws to adjust the screen.
The instructions of this manual are for reference about the product. There may
be differences due to updates.
Please check our website (www.steren.com) to obtain the latest version of the
instruction manual.
Product design and specifications are subject to change without notice.
Check your screen’s manual for more
information.
A
C
G
