14 TO 42” TV STAND
INSTRUCTION MANUAL
V2.0 /0518A
Support
Clamping bars
√
Customer Service Center
01 800 500 9000
V3.0
1018A
IMPORTANT
CONTENT
Before using the product, read this instruction carefully to avoid any malfunction.
The information presented serves only as a reference for the product. Due to
updates there may be differences. See our website www.steren.com for the latest
version of this manual.
•This device is not intended for use by persons (including children), whose
physical, sensory or mental abilities are different or reduced, or lack experience
or knowledge.
• Children should be supervised to ensure they do not use the device as a toy.
• This product is designed for indoor use.
• Choose a solid surface to be able to securely fix the support.
• Do not exceed the maximum load capacity (20 kg).
SCREWS AND RONDANES KIT
TOOLS NEEDED
Not incluided
INSTALLATION in concrete
INSTALLATION in wood
A)
B
Wall of concret
Wall of wood
Secure
Base for level
Base for level
Use the support and a leveler to make drilling marks on the
surface where you want to install. Then, drill and, place the
screws, As shown in the picture.
Place the grab bars on the back of the screen. Choose 4 screws
and 4 washers of the same size to secure the bars firmly.
Install the screen on the stand.
(Loosen the
security screws to mount the screen without difficulties.
Tighten the screws again to secure the bars)
M5 X 12 MM
B(4 pieces)
M4 X 12 MM
A(4 pieces)
M6 X 12 MM
C(4 pieces)
Base for level
F2(1 piece)
M6
F1(7 pieces)
M6
E(3 pieces)
M6
D(3 pieces)
E
F2
,
or
