Steren RM-100, Instruction Manual

Page: 18 / 80

3. Hold down the “SET” key and
release it after the operation
indicator blinks for three times. The
operation indicator is on and it is
now the code entering state.
4. Enter the 5 - digit code you
searched out, as figure:
5. The indicator will be off after the
code is entered. If the operation
indicator is on after blinking for
three times, the code entered is
wrong and should be reentered.
6. You can check whether the
function keys on the remote
controller are under normal
operation (such as power, menu and
other keys). If they are under normal
operation, the setup is successful. If
they are not under normal operation,
please repeat steps 1-6.
Indication light is on
Indication light is off