R1
R15
R2
R6
R13
R11
R7
R9
R16
L2
R3
L1
R17
R5
R4
R8
R14
R18
R19
R12
Q8
Q3
Q6
Q4
Q2
C4
D1
D4
D3
JP1
D2
XT1
Q7
5
ICSP
CLOCK
DATA
GND
VDD
VPP
VDD
X2
VPP
Q5
C9
C1
C6
C3
C2
C8
C7
C5
LSP1
LSP2
1017m
Instruction manual
V0.0
programmer
PIC microcontroller
PIC-605
Before to use the product, please read carefully this manual to avoid any malfunction. The info in this manual is shown as
reference. Due to updates can exist differences.
Consult our website
www.steren.com
to obtain the current version of this manual.
CAUTIONS
INSTALLATION
OPERATION
SPECIFICATIONS
• To avoid any damage to the programmer, make sure that the PIC pins to be programmed are correctly connected.
• Do not place metallic objects on the program card or place the card on metal surfaces.
• This appliance is not intended for use by persons (including children) whose physical, sensory or mental capabilities are different or
reduced, or lack experience or knowledge.
• Children should be supervised to ensure that they do not use the appliance as a toy.
Input: 5V - - - (x USB)
After installed your
PIC-605
it is recommended that you first connect it before opening the
PIC-605
program, in case of failure to do so
you need to detect the
PIC-605
by pressing
“DETECT PROGRAMMER”
once connected.
On
Windows 7
and later is necessary to run
PIC-605
as administrator, so to run it is necessary to select from the menu which appears
when you press the right button of the mouse
“Run as Administrator”
.
Once executed the program and recognized the programmer the following options must appear within the
“Basics”
tab.
This option identify the placed PIC on the
ZIF
base or connected to
ICSP
port. First, make sure to
select the pins in the
IC-Socket / ICSP
box dialog, and the family in
PIC Family
box dialog.
Consider that for
12Fxxx
family select
16Fxxx
in the
“pic family”
menu.
Only for Windows 8, perform the following procedure.
Before you start the installation, remember to save and close all your programs before
doing so.
IMPORTANT
1.
Press
Win+I
( Windows key and I simultaneously) and select
“Change PC settings”
at the bottom right of your screen.
2.
Select
“General use”
and lower right menu to
“Advanced Start”
and select
“Restart now”
.
3.
Your PC will restart with a menu, select the option
“Troubleshoot”
.
4.
Select
“Advanced options”
,
“Boot configuration”
and
“Restart”
.
5.
Your PC will restart with a menu, select 7 or F7 and then
“Disable the mandatory use of signed drivers”
.
Insert the installation disk provided with the
PIC-605
in the CD drive of your computer, or download the files in
www.steren.com.
Run Setup depending on your case:
Install
PIC-605
Windows 98_ME_2K_XP
or Install
PIC-605 Windows Vista_7_8
and follow the instructions that will appear on
screen.
If the message
“Do you want to allow this program from an unknown publisher to make changes on the computer?”
or
“Do want
to run this file”
appears, select
“Yes”
or
“Run”
.
1.
Connect the
PIC-605
to your computer.
2.
The
“New hardware wizard”
will run.
3.
Select
“Not for the moment”
and press “Next”.
4.
Select
“Search driver software on the PC”
or
“Install from a list or specific location”
and press
“Next”
.
5.
Select
“Browse”
and find the folder
“C:\ Archivos files (x 86) \Steren PIC-605\driver”
and select the appropriate folder
“driver_98_Me_2k_Xp” or “driver_vista_7_8”
.
6.
If see you a warning about Windows logo message, press
“Continue”
.
7.
If
“Windows cannot verify the Publisher of this software”
appears, select
“Install this software anyway”
.
8.
Press
“Finish”
to finalize the process.
Your PC will restart and you can continue with the installation process.
The function
“Disable the mandatory use of signed drivers”
will disappear automatically when you restart your PC.
Consider that you must have administrator rights on your computer to install and run this program.
Asegúrese de que no existe ningún PIC conectado al programador durante la conexión o desconexión.
Software installation
Driver installation
Identify PIC in programmer
Writes the program previously loaded with the
“Select HEX-File as source”
option, into the connected PIC.
Write HEX-File into PIC
Reads the
PIC
memory and save into a
new .HEX file
, you must enter a name and location for
the new
.HEX
file.
Read from PIC into new HEX-File
Use this option to switch the
PIC
on
run mode
after programming it into the
ICSP
port, be careful to insulate the
ICSP
port
from the rest of the circuit where the
PIC
is installed.
Target: Run
Remove the code protection in some cases, it depends if the code protection was installed in the program or while
programming.
Remove CP
Select HEX-File as source
Compares the content of the
PIC
memory with the previously loaded program.
Compare PIC with HEX-File
Deletes the
PIC
program or code inserted or connected.
Erase PIC
Check that the
PIC’s
memory is empty.
Blank check
Specifications may vary without previous notice
