H I G H L I G H T S
•
The smart RGB LED controller is an additional accessory to turn on/off,
configure and control the color, intensity, brightness and sequence of your LED strips.
•
The IR remote control has an a effective operational range of 20ft.
•
The maximum power is 70 W supports therefore can be used with more than one
strip of LEDs connected in series, provided that the sum of all power does not exceed
the maximum capacity.
• Do not use or store the equipment near wet places. May cause malfunction or shock
hazard.
• Avoid dropping the unit as this may cause damage.
• Do not put heavy objects on the device or accessories.
• Do not use solvents or other chemicals to clean the exterior of the device.
• Remove batteries if they are empty or if the player is not going to be used for a long
time.
C O N N E C T I O N
2. Connect a 12-24 V 6 A max
power supply
,
po to the center
(not included) to the controller and
to a wall outlet.
1.
If
the
strip
has
a
connector
compatible with the controller, simply align the
black wire with the arrow on the connector of
the controller.
If the strip does not have connector, consult a
specialist.
3. Begin to operate the controller with remote control.
Make sure that the power supply corresponds to the LED strip voltage.
W
R
B
G
QUIC
K
SLOW
DIY1
DIY4
JUMP
3
DIY2
DIY5
DIY3
DIY6
AU
TO
FLAS
H
JUMP
7
FA
DE
3
FA
DE
7
I P2
LED C
ONTROLLER
I
DC12
O
DC12
3CH
L
IR
P
72
WMA
+1
2V
+1
2V
B
+
+
G
R
B
G
R
B
G
R
B
Ti
ra de LED /
LED stri
p
S P E C I F I C A T I O N S
Input: 12-24 V 6 A max
Charging current: 2 A x 3 CH
Power output: 70 W
Remote control
Input: 3 V (CR2025)
You must use a regulated power source
C O N T R O L S
1. Turn on the strip.
2. Pause the sequence.
3. Raise / lower the brightness.
4. Press the button of the color you want.
5. DIY 1-6: custom colors. To save a custom color, select it and press a DIY
memory.
-Use and to increase and decrease the red, green and blue intensity.
-When you get the desired color press selected DIY memory 5 seconds.
6 QUICK / SLOW: Increases / decreases the change rate in a sequence.
7. AUTO: Changes the sequence randomly.
8. Flash: Strobe function
9 JUMP 3 / 7: Switches between 3 or 7 colors.
10 FADE 3 / 7: Switches between 3 or 7 colors but with fade.
In the DIY buttons, you can save only customized
colors.
W
R
B
G
QUIC K
SLOW
DIY1
DIY4
JUMP 3
DIY2
DIY5
DIY3
DIY6
AUTO
FLAS H
JUMP7
FADE3
FADE7
1
2
3
4
5
6
7
8
9
10
I M P O R T A N T
The instructions of this manual are for reference about the product. There may
be differences due to updates.
Please check our website (www.steren.com) to obtain the latest version of the
instruction manual.
Before using your new Steren´s product, please read this instruction
manual to prevent any damage.
MODLED-010
Instruction manual
RGB
LED strip IR controller
V0.1
0813b
W
R
B
G
QUIC K
SLOW
DIY1
DIY4
JUMP 3
DIY2
DIY5
DIY3
DIY6
AUTO
FLAS H
JUMP 7
FADE3
FADE7
IP2
0
LED
CONTROLLER
Input:DC12
V
Output:DC12
V 3C
H
Loa
d
IR
Power:72W
MAX
.
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center.
01 800 500 9000
Product design and specifications are subject to change without notice.
Product: RGB LED strip IR controller
Part number: MODLED-010
Brand: Steren
C A U T I O N S
