Before using your new Steren´s product, please read this instruction
manual to prevent any damage.
S P E C I F I C A T I O N S
I M P O R T A N T
Receiver
Input: 3 V - - - (2 x AA)
Operational temperature: -10° to 40°C
Transmitter (microphone)
Input: 1.5 V - - - (1 x AA)
Frequency response: 100 Hz - 10 kHz
Impedance: 600 ohms
Sensitivity: -72 dB ±3 dB @ 1 kHz
The instructions of this manual are for reference about the product. There may
be differences due to updates.
Please check our web site (www.steren.com) to obtain the latest version of the
instruction manual.
Product design and specifications are subject to change without notice.
This set has a single receiver and two wireless microphones being perfect to use with two
independent persons in your events, without interferences, the maximum range between them is
10m. It includes switch and in-use indicator LED. The microphone is powered by one AA battery.
The receiver has a telescopic antenna giving bigger sensitivity and it includes on/off switch. It can be
plugged into an amplifier, mixer or amplified speaker box using the 6.3mm connector.
C O N T R O L S
H I G H L I G H T S
3. Turn the amplifier on and start to use the microphone.
• Corded mode
• Cordless mode
1. Use the cannon-6.3mm cable (not included)
and plug to an amplifier, connect the opposite
extreme to the microphone.
2.Turn on the microphone.
1. Connect the antenna in the
microphone input.
2. Connect the receiver to an amplifier and turn it on.
4. Place the switch to ON in order to mute the sound without turn the microphone off.
5. Turn off the microphone.
6. When you have finished using the microphone, remove the battery and store.
3.
Turn on the microphone and the amplifier.
4. Check for signal at the microphone.
I N S T R U C T I O N S
MIC 2
MIC 1
Input
Selector
LN
10
07
05
02
00
00
10
00
00
10
07
05
02
10
07
05
02
PH
LN
PH
MONO
ST
Input
Selector
Output
Selector
Power
On
Mic Bal.
Mic 1
Mic 2
Mic Level
Talkover
On
Channel
Channel
2
HP
Channel 1
Channel 2
Channel USB
00
10
Mp3 PLAYER
+5dB
0dB
-5dB
10dB
-15dB
Output Meter
USB
• Do not use or store the equipment near wet places. May cause malfunction or shock hazard.
• Avoid dropping the unit as this may cause damage.
• Do not put heavy objects on the device or accessories.
• Do not use solvents or other chemicals to clean the exterior of the device.
• Remove batteries if they are empty or if the player is not going to be used for a long time.
Product: 2-WAY CORDLESS MICROPHONE
Part number: MIC-282
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center.
01 800 500 9000
• Microphone
1. Open the compartment lid.
2. Place a battery (AA), pay attention to the
polarity.
• Receiver
1. Open the battery compartment on the
receiver.
2. Insert two AA battery in the receiver
taking care of polarity.
MIC 2
MIC 1
Input
Selector
LN
10
07
05
02
00
00
10
00
00
10
07
05
02
10
07
05
02
PH
LN
PH
MONO
ST
Input
Selector
Output
Selector
Power
On
Mic Bal.
Mic 1
Mic 2
Mic Level
Talkover
On
Channel
Channel
2
HP
Channel 1
Channel 2
Channel USB
00
10
Mp3 PLAYER
+5dB
0dB
-5dB
10dB
-15dB
Output Meter
USB
B A T T E R Y I N S T A L L A T I O N A N D R E P L A C E M E N T
1
2
3
4
5
6
9
10
11
7
8
• MIcrophone
1. Battery compartment.
2. Switch:
- MIC: microphone on.
- OFF: microphone off.
- ON: To mute the sound.
3. Power LED indicator
4. Grill: Protects the microphone cartridge
and helps reduce “breathy” and wind noise
pick-up.
5. Cannon plug. This plug is connected to the
input from microphone.
• Receptor
6. Battery compartment.
7. SignalLED
8. Power LED indicator
9. ON/OFF switch.
10. Power input.
11. Audio output.
V0.1
2-way cordless
microphone
