V1.0
0715m
Instruction manual
ILUMINACIÓN
LAM-
055
360º motion sensor
socket
5 s
3 min
HOW TO USE
With the help of a millimeter flat screwdriver, turn the time knob to set the time that
the lamp stays on when motion is detected.
Before using your new Steren´s product, please read this instruction
manual to prevent any damage.
IMPORTANT
The instructions of this manual are for reference about the
product. There may be differences due to updates. Please
check our website (www.steren.com) to obtain the latest
version of the instruction manual.
HIGHLIGHTS
CAUTIONS
The socket includes motion and luminosity sensor, and it is perfect to install it in
backyards, garages, auditoriums and corridors.
It has a 360° pyrometric sensor that helps to power on a lamp when detects
motion.
The sensor has setting control for timer and light intensity, helping you to save
energy.
• The installation must be made by qualified personnel
• Before making the connection, cut the power supply
• Avoid exposure to extreme temperatures
• Do not use or store the equipment in places where there dripping
or splashing. It can cause malfunction
• Do not use lamps with higher capacity than specified
• Do not install outdoor
• Do not use with dimmer
PARTS
TROUBLESHOOTING
Base
Sensitivity knob (Lux)
Time knob (Time)
Motion
Socket
INSTALLATION
SPECIFICATIONS
Nominal consumption: 14.9 Wh/day
Standby Consumption: Not applicable
127 V ~ 60 Hz 60 W max
Load:
60 W (incandescent bulb)
20 W (energy saver bulb)
Operational temperature:
-20°C to 40°C
Operational humidity: < 93%
Product design and specifications are subject to change without notice.
2
3
1
5
4
Avoid to install if your hands are wet or if the surface where you are standing there is
water or humidity.
ELECTRIC
RISK
ELECTRIC
RISK
Install under an overhang, canopy or roof, under 3 m away.
1
2
or
1
2
3
4
5
1
Turn the light switch in your home or office.
3
When the device detects motion lamp will turn on automatically.
It will turn off after a few seconds.
4
Turn the lux knob, to adjust motion sensitivity that will detect the lamp. The
sensitivity control allows you to adjust according to lighting conditions. If you need to
turn on when there is little light, turn left and if you want to turn on when there is
light, turn right
2
3
2000
• Adjust the lux and time controls.
• Check that the lamp is installed under 3 meters height.
• Check the placement of the lamp socket.
• Turn on the home switch.
• The socket is connected
but the lamp does not turn
on.
Problem
Solution
Product: 360º motion sensor socket
Part number: LAM-055
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in
workmanship and materials to the original purchaser for one year from the date
of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice, product box or
package, and product, must be presented when warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was
received.
4. Steren sell parts, components, consumables and accessories to customer, as
well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling,
leaky batteries,
failure to follow enclosed instructions, improper repair by unauthorized
personnel, improper
safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase
establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or
purchase ticket.
RETAILER INFORMATION
Name of the retailer __________________________________
Address ____________________________________________
Product ____________________________________________
Brand ______________________________________________
01 800 500 9000
In case your product
fails or have
questions, please
contact your nearest
dealer. If you are in
Mexico, please call to
our Call Center.
