Steren K-420, User Manual

Page: 6 / 18

OPERATION OF THE ANALOG/DIGITAL CONVERTER KIT
K-420
1. Never connect the analog/digital converter kit K-420 to the
computer if the analog/digital converter kit is connected to the power
source.
2. Make sure the analog/digital converter kit K-420 is powered off.
3. Once the analog/digital converter kit K-420 is connected, make sure
its supported by a non-conducive surface and that this surface is free of
any elements that may cause a short circuit in the PCB circuit.
4. Make sure that the power cables are well connected and that the
power source is correct at 5 regulated volts.
SPECIFICATIONS
Polarization Voltage: 5 V - - -
Power Consumption: 3 mA
Product design and specifications are subject to change without
previous notice.
DIAGRAM
ENGLISH
ENGLISH-06