Steren HER-256, Instruction Manual

Page: 18 / 24

77
INSTRUCTIONS
1. Connect one end of the cable you want
to test on the left side of the tester, in the
corresponding entry, do the same with
the other end, but on the right side of the
tester.
2. Turn the knob to the number one to
check continuity of the pin 1, the green
LED (left pin) and the yellow one (right pin)
from the pin 1 will light.
Depending on the amount of pins that the cable has, repeat the process by
turning the knob to the other numbers.