6
Connect the drone battery
Turn on the remote control
Push the lever up and down
1
2
3
PAIRING DRONE WITH REMOTE CONTROL
Before turn on the remote control, make sure that the left lever is in the middle.
The first time that you use the drone, restart functions to
start the flight properly. Later, you can do this operation
every time you need to return the drone to the factory
settings.
All settings made before will be deleted
Push the two levers and keep them for a few seconds, as
shown in the image.
BEFORE STARTING...
RESTART
Drone stability can be affected by environmental conditions. If you note that the drone has an unusual
inclination towards a particular position, slide calibration buttons corresponding to the opposite direction.
Example 1:
If the drone leans forward slide the
Back button calibration
, as shown in the image.
FLIGHT CALIBRATION
Forward
Backward
Slide repeatedly until correct the position