Steren CCTV-250, Instruction Manual, Page: 23 / 31

8
DIP switch settings
To set the DIPs is necessary to remove the mounting bracket of the camera,
follow these steps:
- Turn left support for withdrawal.
- Remove the label located at the base of the camera.
By using these switches you can set the direction of each of the cameras
by binary code. When the switch is in the off position, represents a zero and
when it is on position represents a 1.
Thus, for example, to set the 52 position you must set the switches 3, 5 and 6
in the ON position and set the camera 25 should turn on switches 1, 4 and 5.
SWITCHES 1 TO 6