Before using your new Electronic insect killer, please read
this instruction manual to prevent any damage. Put it away
in a safe place for future references.
Before using your new Color
3,
R
motion detector camera
system, please read this instruction manual to prevent any
damage. Put
it
away in a safe place for future references.
WARRANTY
This Steren product is warranted under normal usage against defects in
workmanship and materials to the original purchaser for one year from the
date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice or
purchase ticket, product box or package, and product, must be
presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free
of charge.
3.- The repairing time will not exceed 30 natural days, from the day the
claim was received.
4.- Steren sell parts, components, consumables and accessories to
customer, as well as warranty service, at any of the addresses mentioned
later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God,
mishandling, leaky batteries, failure to follow enclosed instructions,
improper repair by unauthorized personnel, improper safe keeping,
among others.
a) The consumer can also claim the warranty service in the purchase
establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice
or purchase ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your
nearest dealer. If you are in Mexico, please give a call to our Call
Center.
Call Center
01 800 500 9000
Product: Color pir motion detector camera
system
Part number: CCTV-117
Brand: Steren
Before using your new Electronic insect killer, please read
this instruction manual to prevent any damage. Put it away
Product design and specifications are subject to change
without previous notice.
SPECIFICATIONS
Input: 12 V - - - 500mA
Power adapter
Input: 100-240V ~ 50-60Hz 7W
Output: 12V - - - 500mA
IMPORTANT
• Only use the included AC adaptor. Using any other adaptor may cause
damage to the camera.
• When disconnecting the adaptor from the home power source wall
contact, make sure to disconnect it by the plug and not pulling from the cable.
• Make sure to never touch the adaptor with wet hands.
HIGHLIGHTS
-Horizontal resolution:
420 lines
-Sensor:
Sharp
CCD ¼”
-Angle of vision:
45°
-Minimum lux:
0.3Lux
-Operating temperature:
0°C ~ 50°C
-RH:
85%
-Gamma correction:
48dB
CONTROLS
1. BNC video plug.
2. Inverted power supply plug.
3. Lens.
INTRUCTIONS
1. Place the camera where you need to monitor.
2. Plug the AC power adaptor to an AC household outlet.
3. Insert the cable from the AC adaptor into the camera’s power input plug.
4. With a cable BNC video output BNC connect the camera to the
inputs A / V monitor with a BNC connector or connect the BNC
cable of the camera to the input of a DVR.
5. Select the correct video
input on your video device.
(See your device’s instruction
manual)
6. Now the camera is ready to
use it.
USB
MOUSE
IN2
IN1
CH2
CH4
IN3
AUDIO IN
VIDEO IN
MAIN OUT
LAN
VGA
DC 12V
POWER
ALARM
IN
12
34
GG
TX
+
TX
-
TX
+
TX
-
-
+
ALARM
OUT
RS422
AUDIO
OUT
2
IN2
CH2
CH4
IN3
N
VIDEO IN
2
1
3
