5
Operación
• Coloque la estación de trabajo sobre una superficie plana y la
pistola sobre su soporte.
•
Conecte el cable de alimentación,
fije la boquilla que necesite (ajuste
la capacidad de aire usando la
perilla de flujo de aire).
•
Encienda el equipo y establezca la temperatura que necesita mediante los
botones (
▼
/
▲
).
• La unidad se calentará hasta alcanzar la temperatura seleccionada.
•
Después de la operación, debe colocar el mango en su plataforma. La unidad
detendrá automáticamente el calentamiento y entrará en estado de espera.
•
Desconecte la alimentación si no va a utilizar la unidad por un largo tiempo.
PRECAUCIÓN:
Usted puede extender la vida útil de los elementos de calentamiento y proteger el
chip IC si realiza el
trabajo a una temperatura inferior y mayor flujo de aire.
PRECAUCIÓN:
Cuando no utilice la pistola, coloquela en su base, este se activara en modo reposo
automáticamente y evitara un sobrecalentamiento, cuando la vuelva a utilizar retire
la pistola de su base y espere a que vuelva a marcar en pantalla la temperatura que
eligió.