background image

Product / Producto: SCIENTIFIC 
GRAPHIC CALCULATOR / 
CALCULADORA CIENTÍFICA 
GRAFICADORA
Model / Modelo: CAL-150
Brand / Marca: Steren

CONDICIONES

1. Para hacer efectiva esta garantía se requiere: La presentación de esta póliza y del producto, en el lugar en donde fue adquirido o 

en ELECTRONICA STEREN S.A. DE C.V.

2. ELECTRONICA STEREN S.A. DE C.V. se compromete a reparar el producto en caso de estar defectuoso sin ningún cargo al 

consumidor. Los gastos de transportación serán cubiertos por el proveedor.

 

3. El tiempo de reparación en ningún caso será mayor a 30 días contados a partir de la recepción del producto en cualquiera de los 

sitios en donde pueda hacerse efectiva la garantía.

4. El lugar donde puede adquirir partes, componentes, consumibles y accesorios, así como hacer válida esta garantía es: En 

cualquiera de las direcciones arriba mencionadas.

ESTA GARANTIA NO ES VALIDA EN LOS SIGUIENTES CASOS:

1. Cuando el producto ha sido utilizado en condiciones distintas a las normales.

2. Cuando el producto no ha sido operado de acuerdo con el instructivo de uso.

3. Cuando el producto ha sido alterado o reparado por personas no autorizadas por ELECTRONICA STEREN S.A. DE C.V.

Nota: El consumidor podrá solicitar que se haga efectiva la garantía ante la propia casa comercial, donde adquirió el producto. Si la 

presente garantía se extraviara, el consumidor puede recurrir a su proovedor para que le expida otra póliza de garantía, previa 

presentación de la nota de compra o factura respectiva.

DATOS DEL DISTRIBUIDOR

DISTRIBUTION / NOMBRE / DISTRIBUIDOR:

ADDRESS / DOMICILIO:

PRODUCT / PRODUCTO:                                                             BRAND / MARCA:

MODEL / MODELO:                                                  SERIAL NUMBER / No. DE SERIE:

DATE OF DELIVERY / FECHA DE ENTREGA:

Call Center / Centro de Atención a 
Clientes 
del Interior 01 800 500 9000
Mexico City / Cd. de México: 5
3 54 22 90

Warranty

CONDITIONS:

1. This warranty card with all the required information, the invoice or purchase ticket, the product box or package, and the 

product, must be presented with the product when warranty service is required.

2. If the product stills on the warranty time, the company will repair it free of charge even the transportation charges.

3. The repairing time will not exceed 30 natural days, from the day the claim was received.

4. Steren sells parts, components, consumables and accessories to customer, as well as warranty service, at any of the 

following addresses:

THIS WARRANTY IS VOID ON THE NEXT CASES:

If the product has been damage by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed 

instructions, improper repair by unauthorized personal, improper safe keeping or otherwise.

Notes:

a) The customer can also claim the warranty service on the purchase establishment.

b) If you lose the warranty card, we can reissue it just showing the invoice or purchase ticket.

V0906

Póliza de Garantía

This Steren product is warranted 
under normal usage against 
defects in workmanship and 
materials to the original purchaser 
for one year from the date of 
purchase.

Garantiza este producto por el 
término de un año en todas sus 
partes y mano de obra contra 
cualquier defecto de fabricación y 
funcionamiento, a partir de la fecha 
de entrega.

Summary of Contents for CAL-150








































































































































































































































































Reviews: