Before using your new Steren´s product, please read this instruction manual to prevent
any damage.
I M P O R T A N T
The instructions of this manual are for reference about the product.
There may be differences due to updates.
Please check our website (www.steren.com) to obtain the latest version of the
instruction manual.
Product: 2.1 Ch audio system
Part number: BOC-1040
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center.
01 800 500 9000
Product design and specifications are subject to change without notice.
C A U T I O N S
•
Do not try to open the device, may cause damages and warranty will be void.
•
Make sure the volume control of your audio system is in minimum level before using the
BOC-1040. Extreme sounds may cause damages to your ears.
•
Do not expose to extreme temperatures.
•
Clean with a soft, dry cloth.
•
Avoid dropping the unit as this may cause damage.
•
Do not place your speakers near a TV or monitor as this could cause magnetism (your TV or
monitor’s color would be distorted).
•
When you want to unplug the equipment, pull the plug & release from the AC outlet. Never pull
from the power cord.
•
If power cord has been damaged, contact your nearest dealer for a replacement.
H I G H L I G H T S
The 2.1 channel audio system has 250 W PMPO, volume control and power light in the front panel.
The satellite speakers and the subwoofer will deliver a clean and strong sound, with low distortion.
It is compatible with MP3 players, discman, computers, portable DVDs or any audio-video device
with 3.5 mm connector.
•
Low distortion.
•
RCA input line.
•
Stereo sound.
•
MFD baffle (for best acoustic performance).
C O N T R O L S
1. Power light
2. Volume: Set the volume level.
3. On / Off Switch: Turn on or off the device.
4. Power cord
5. Right and left output: To plug the right and left satellite speakers
6. Audio input: Allows you to connect an external audio system.
I N S T R U C T I O N S
1. Connect the satellite speakers to the Output
jacks, located in the rear side of the subwoofer.
Make sure the colors of the jacks match
with the colors of the cables.
IN PUT
OUT PUT
Input: 110 V~ 60 Hz 27 W
Power output: 23 Wrms
Input sensitivity: 500 mV
Subwoofer
Power output: 10 Wrms
Frequency response: 40 Hz - 190 Hz
Diameter: 4”
Impedance: 4 ohms
Satellites
Power output: 7 Wrms (each)
Frequency response: 170 Hz - 20 kHz
Diameter: 2”
Impedance: 4 ohms
Nominal consumption: 600 Wh/day
Stand-by power consumption: Not applicable
S P E C I F I C A T I O N S
2. Use a RCA to RCA cable or RCA to 3.5 mm
cable, according to your needs. Plug the RCA
audio cable to the Input jack (located in the
subwoofer). Make sure the colors of the jacks
match with the colors of the cable.
Connect the other end of the cable to your
external audio equipment.
IN PUT
•
Example:
- If you want to connect your DVD, you need to use a RCA to RCA cable.
- If you want to connect your ipod or MP3, use a RCA to 3.5 mm cable.
3. Set the volume to the minimum before powering on the speakers;
later you can adjust it according to your needs.
4. Plug the power cord to an AC outlet.
5. Turn on the subwoofer.
6. Turn on the audio device and play a song.
UT
PUT
MIN
MAX
VOLUME
