8
Before you can use the AUD-776 you need to pair it (connect it) to the telephone or music device compatible
with bluetooth.
Pairing will connect the devices using bluetooth wireless technology and will store the settings into the
AUD-776’s memory to be recognized later. Once the devices have been paired, these will automatically
connect to each other once they are both turned on and within range.
1. Turn on the AUD-776 by pressing and holding the multifunction key until the indicator light begins to flash
blue and red.
2. Put your cell phone in bluetooth mode (for more information on how to do this, consult your cell phone’s
user manual).
3. When the cell phone finds the device “AUD-776”, confirm the pairing.
Some cell phones may require a PIN code (0000 is the default in most) to complete the pairing. Consult the
user manual of your cell phone for more information about this PIN code.
The AUD-776 can store a pairing memory of a maximum of 8 different bluetooth devices. The memory of each
paired device. If you attempt to pair more than 8 devices, each new one will overwrite the oldest pairing from
the memory.
To connect the AUD-776 to another device stored in this memory, restart the headphones and the device you
wish to connect it to. If there are multiple devices stored in the headphones memory, it may take a moment to
connect after restarting it.
The maximum distance between the devices can be up to 10 meters. The closer the devices are to each
other, the better they will perform.
5. AUD-776 PAIRING
5.1 First-time use
5.2 Pairing suggestions
