ANT-UHF 06R
0717m
ANTENNA
WITH BOOSTER
V0.0
6 ELEMENTS AERIAL
Instruction manual
IMPORTANT
CAUTIONS
Read these manual to avoid any damage.
The instructions of these manual are for reference about the product.
There may be differences due to update.
Please check our web site
www.steren.com
to obtain the latest version of
the instruction manual.
• Do not install the antenna near high voltage cables or transformers.
• Use plastic insulating straps to secure the cable.
INSTRUCTIONS
SPECIFICATIONS
Adjust the dipoles in a right position. To do this, loosen the wing nuts,
adjust and then tighten the nuts.
1
Specifications may vary without previous notice
Impedance: 75 Ohms
Connector: F type
Power cord: 1.4 m 18 AWG
Intergrated coaxial cable: 15 m
Coaxial cable from box to TV: 1.5 m
360º rotation
ANTENNA:
Input: 12 V - - - 300 mA
BOOSTER:
Input: 120 V~ 60 Hz 5.2 W
Output: 12 V - - - 300 mA
REMOTE CONTROL:
Input: 3 V - - - 12 mA (2 x AAA)
Perform a digital channel searching on your TV. If it is necessary, orient the
antenna with the remote control (pointing to the booster) or with the
booster button.
6
Connect the antenna coaxial cable to the booster and additional coaxial
cable to the TV and the antenna as shown in the image:
5
Insert the dipole into the antenna and tighten the wing nuts until fix it.
2
Apretar
A
A
B
B
Assemble the mast and fix it on a wall.
3
Fix the antenna into the mast.
4
TV
Antena
Press
Press
Option A
Option B
