![background image](http://html.mh-extra.com/html/steren/amp-200/amp-200_instruction-manual_1372838023.webp)
10
18.- Auxiliary inputs: Allow one to plug audio devices with RCA jacks such as radio tuner, tape
deck, CD players, etc.
19.- Main in terminal: After removing the bridging-strip between the Pre-Out and the Main-In
terminals you can include an external signal processor. Provides a proper solution whenever
shaping or improving the audio signal when is necessary (adjusting delay times, equalizing,
eliminating noises, etc.) The input is non-balanced and is controlled by the main volume control
and bass and treble knobs.
20.- Pre out terminal: This terminal output the mixed audio signals from all the connected sources
on the amplifier. It can be used to feed an external amplifier, a signal processor or any other
external device.
21.- Monitor volume control: Set the volume level of the connected device to the monitor input
22.- Auxiliary paging input level control: Set the volume level of the connected device to auxiliary
paging input.
23.- DC switch: Allow one to power on or power off the external battery.
24.- AC fuse: Protects the alternating currents supply circuit of the equipment.
Summary of Contents for AMP-200
