16
SPECIFICATIONS
Input: 110-240V~ 50/60Hz 50W
Battery: 12V - - - 1.2Ah
Power output: 35W
RMS
Frequency response: 50-12000Hz
Carrier frequency: 160-270 MHz
Sensitivity: 10dBµV
Microphone
Input: 9V - - - (
square battery
)
Frequency response: 40Hz to 16kHz
Total harmonic distortion (THD): <0,5%
Nominal consumption: 432 Wh/day
Stand-by power consumption: 240 Wh/day
Product design and specifications are subject to change, without notice.
5.- Turn on the amplifier.
6. - Turn on the wireless microphone then begin speaking and adjust the volume level according your needs.
7.- When not using the devices turn off the amplifier and turn off the microphone and remove the
microphone´s battery and disconnect the amplifier.
HOW TO USE THE MP3 PLAYER
Your new amplifier includes an SD card / USB reader, where you can store MP3 files and play
them in the amplifier.
1.- Check the amplifier is off.
2.- Place an SD card or USB memory as shown.
3.- Turn the amplifier on.
4.- Press Play to start playing, the indicator LED will flash.
5.- After using the SD card / USB reader, please turn the amplifier off and remove the card / memory.