Before using your new Electronic insect killer, please read
this instruction manual to prevent any damage. Put it away
Before using your new M
otion
sensor, read the following
recommendations.
IMPORTANT
When the battery is low, sensitivity and time
Recovery may vary.
If Ding-dong decreases replace the batteries.
Clean only with a soft, dry cloth.
Do no try to open the equipment, may cause malfunction and
void the w
arranty .
Do not expose to extreme temperatures or direct sunlight.
Do not use or store the equipment near wet places. May
cause malfunction or shock hazard.
Check the battery regularly.
When the equipment is not to be used for a long time, remove
the batteries.
FEATURES
Your new STEREN mo
tion
sensor/alarm is a totally
electronic device which is useful, practical, easy to install, and
conveniently sized. This product is constructed in high-impact
resistant white plastic. It also has a switch which selects
between the 2 functions this device offers.
This device has a support which allows you to adjust the
placement and angle of your sensor up to 260°.
This sensor will sense movement up to 10 m as a maximum.
This sensor is directional, meaning it will only detect move-
ment in a straight line.
FUN
C
TIONS
1) The first function is that of advisement which is used when the
alarm’s switch is set to the CHIME position. In the CHIME
position your alarm will chime twice when it detects movement
inside its range advising you of the movement. This chiming will
repeat itself every time that movement is detected in the alarm’s
range.
2) The second function is the alarm function which is used when
the alarm’s switch is set to the ALARM position. In the ALARM
position your alarm will emit a typical alarm sound when it detects
movement within its range. This sound will continue by 13
seconds and turn off
•
•
•
•
•
•
•
•
•
•
•
•
In both cases (CHIME or ALARM) The device will enter into
operation 13 seconds after having turned.
INSTRUCTIONS
1.- Select the place where you wish to install your alarm/sensor.
2.- Separate the mounting piece from the alarm unit (this can be
done easily by just applying a little bit of pressure).
3.- Measure the separation between the holes in the mounting
piece and place screws in the desired area in order to install the
mounting piece. (screws for mounting not included). (Fig. 1)
(Fig. 1)
4.- Open the battery compartment on the back of the alarm unit
in order to install the included battery (1 x 9V). (Fig. 2) Install the
battery making sure to respect the polarity. Close the battery
compartment.
(Fig. 2) (Fig. 3)
5.- Install the mounting piece in the predetermined area and then
set the alarm unit within the mounting unit. (Fig. 4) Orient the
alarm unit in the direction you wish to monitor. Set the switch on
the alarm unit to the position of the desired function. (Chime or
Alarm).
6.-Make sure that the alarm/sensor is working properly.
SPECIFICATIONS
Input:
9 V - - - (1
9V
battery)
Dimensions:
110 x 68 x 35 mm
Weight:
99.6 g (without battery)
Product design and specifications are subject to change
without previous notice.
ENGLISH
Before using your new Electronic insect killer, please read
this instruction manual to prevent any damage. Put it away
Before using your new Electronic insect killer, please read
this instruction manual to prevent any damage. Put it away
in a safe place for future references.
Before using your new Electronic insect killer, please read
this instruction manual to prevent any damage. Put it away
