Additional control
for ALA-2000
V0.0/0718v
User Manual
IMPORTANT
CAUTIONS
Before to use the product, please read carefully this manual to avoid any
malfunction.
The info in this manual is shown as reference. Consult our website
www.steren.com to obtain the current version of this manual.
• The children should be supervised to ensure that don't use it like a toy.
• This device is not designed for be using by people (including children) with
physical capacities, sensorial or mental reduced, or they don’t have the
necessary experience or knowledge.
• Avoid the drops may cause serious damages.
The operation of this equipment is subject to the following two
conditions: (1) it is possible that this equipment or device may not cause
harmful interference and (2) this equipment or device must accept any
interference, including interference that may cause its undesired
operation.
BATTERY REPLACEMENT
SPECIFICATIONS
ALARM PAIRING
HOW TO USE
1. Remove the screw and open the
control.
2. Carefully remove the plate from the control.
With a pointed object remove the battery and
replace it for a same features
(CR2032). Pay attention in the
polarity.
3. Place the plate in the
control and place the cover
again, screw it firmly.
1. Slide the switch to the ON position. You will hear a tone and the LED of the
blinking light, will flashing once.
2. Press once the setting button. The LED of the blinking light, will flashing.
3. Wait for 3 seconds, in the remote control press SOS button. If the pairing is
success the LED of the blinking light, will flashing once.
4. Press the setting button 4 times. The LED of the blinking light, will turn on
one by one, repeat this process until the LED power off.
With the alarm connected into an outlet:
Input: 3 V - - - (CR2032)
Operating frequency: 315 MHz
Operating temperature: -20 °C to +55 °C
Storage temperature: - 40 °C to 70 °C
RH: 40% to 80%
Specifications may change without previous notice
Press SOS to activate the alarm
Press to deactivate the alarm
