Safety Notes:
The
control board is
DC power
electronics of the
designed to accept
ONLY.
Ensure
connections are made correctly
that the positive and negative
before
ing
the unit. Incorrect wiring will cause damage to the board.
power
on
an open circuit design. D
allow
The control board is
o not
conductive objects
such as
pieces of wire
stray pieces of
to touch any of part of
small
or
metal
the circuit Mount inside an inclosure using insulated (plastic) stand offs or
.
insulating pads. Do not mount directly to any conductive metal or aluminum
plates. Handle with care, do not drop or touch the electronic parts on the board.
Keep the board from damp environment.
Keep the board in adequate ventilation.
Keep the board from mechanical damage.
Note: the DB25-1205F, has a female 25 pin line printer port input to be used
with a male parallel printer cable.
It can not be used with serial printer cables, usb to serial printer cord adapters,
or any other cable that is not a parallel printer cable .
If your computer does not come with a DB25 parallel printer port, one may be
installed.
To avoid frustration be sure you have the right cable.
www.StepperMotorCanada.ca
Model#-DB25-1205F
