STEPHEN TECHNOLOGIES CO.,LIMITED SVG500SO 1 FXS + 1 FXO SIP VoIP ATA User Manual
22
4.1 Configuration
Open the hyper terminal window, input a connection name and click “OK” button. Select
TCP/IP(WinSock) in “Connect using” field, input TA’s IP in “Host address” field, “Port number” use the default
value 23. Finally click “OK”.
A login window will show up. Input your user name after “Login:” and password after “Password:”. If user
name and password are correct, it will prompt “Login Correct”, otherwise will prompt “Login Incorrect”.
After login successfully, the window should be:
4.2 Using CLI command to configure the TA
4.2.1 CLI command list as below:
Itno
Command
Description
1
?
Show CLI Command
2
arp
ARP Configuration
3
ipconfig
Interface Configuration
4
save
Save to flash
5
reboot
Reboot
6
exit
Exit
7
debugmode
Enter Debug Mode
