FEATURES
Page
5
Ez Verify—Test Mode
If the Reporter is not yet sending realtime to clients, you may still verify that the
Realtime TV is ready to receive realtime. Simply plug the wireless transmitter (X7,
RED or Ez Send) into the Reporter’s computer. Thereafter tap the Realtime icon on
your TV to open a realtime file. The TV will automatically send a test message to
your TV: “Wireless Connection Successful.” That message will continue until your
first steno stroke, at which time the test message will cease and your realtime will be
displayed on your TV screen.
Note: The test message is sent and will be received on the TV even without the
Reporter’s CAT software program being opened. The test signal is not sent when
using a USB ME2U transmitter.
Wireless Connection Successful
Receiving the “Realtime Connection Successful” message tells you the transmitter
and TV are functioning properly. If the realtime transcript is thereafter not
received on the Realtime TV and/or other computers, that is an indication that the
buad rate, protocol or com port settings on the reporter’s computer may be the
issue.
