Operation
In first time use or re-pairing to new BT Device, pairing the unit to external BT Device as below:
1.Press and hold the MFB button until the Red and Blue Indicators is light and blinking.
( it may need approximate 8 seconds)
2.Power on the external BT Device and enter to searching mode. Start pairing as the on screen instructions on
the external BT Device. After paired, the color of indicator will turn to blue and blinking. ( For details pairing
procedures, please refer to the user's manual of your BT Device).
Notes :
-When the external BT Device search the unit, our model number "SB-200N" will appear on the display of
external BT Device.
Normal operation after pairing:
1.
Turn on the BT function of the external BT Device.
2.
Press and hold the MFB button until the Blue Indicators is light and blinking (it may need approximate 5
seconds).
3.
Wait a few seconds until the unit paired to the external BT Device automatically.( the pairing status will show
on the paired BT device's display).
4.
Plays the music in the connected BT Device as usual.
5.
During playback:
-Press the volume "
+
" or "―" button to adjust volume level. (When the volume set to maximum or minimum,
two short beeps will be heard).
-Press and release the MFB button to pause; press and release again to resume.
-Press the
▕
◄◄
or
►►
▏
Button to skip tracks.
6.
If paired to Cell Phone:
-Dial the phone number on the connected external cell phone as usual. Sound will be heard from the headset
then speak to the built-in microphone.
-When a call is incoming during music listening, press the MFB button to hook then speak to the built-in
microphone to answer the phone. When finished, press the MFB button to hook on then resume to music
hearing.
-Last number redial: during listening, press and hold the MFB button approximate 1 second until a beep is hear.
The last dialed number record in the connect cell phone will auto redialing.(function is depends on the cell
phone).
7. When finished, press and hold the MFB button until the color of indicators turns to Red then release the
button to shut off the unit. (it may need approximate 5 seconds).
