Page
7
Molnar 4 Post Hoist
SM4
X
0
Work
Safety
Compliance with the notes on safety can help to avoid personal injury and material damage when
working on the machine. Failure to comply with these notes will cause a considerably risk of injury
for persons and danger of damage or destruction of the machine. Non-compliance with the safety
regulations causes the exclusion of any liability or compensation claims against the manufacturer or
his representative.
Personal Safety Equipment
In principle, the following is to be worn when working on or with the machine:
Protective working clothes.
Tight fitting work clothing (minimal tear strength, no wide sleeves, no rings or other jewelers etc.).
Safety gloves.
Safety boots for protection against heavy falling down objects and slipping on non-skid proof ground.
Dangers Which May Arise from the Machine
The machine was subjected to a risk analysis. The resultant construction and design of the machine
corresponds to the current status of technology. However, certain remaining risks cannot be
avoided!
WARNING! Danger of electric current!
Electrical power can cause severe injuries. There is a danger to life caused by electric current if the
insulation or individual components are damaged.
Switch off the main switch and secure against switching on again before maintenance, cleaning or
repair work. Switch off the power supply before starting work in the electrical system and make sure
that the system is dead. Do not remove any safety features or do not modify such installations in a
way that would adversely affect their function.
WARNING! Danger of injury!
Hydraulic power can cause severe injuries. In case of damage to individual components fluid may
escape under high pressure and cause injury and material damage!
Always relieve all pressures before starting work in the hydraulic system.
Do not remove any safety features or make them inoperative as a result of modifications.
Do not change any pressure settings beyond the values specified in this operating manual.
