Stenhoj MAJOR 4000, Operation And Maintenance Instructions

Page: 16 / 53

T61754
Revision:
15
STENHØJ MAJOR
Adjust the platforms to the wheel track of the vehicle.
Place the vehicle centrally on the platforms compared
to the wheel track.
It is not allowed to operate the main lift while the vehicle is raised on one or two scissor jacks and it is not
fastened.
WARRANTY
:
This lift is guaranteed for one year, covering faults due to manufacturing or material defects, provided that the
installation, operation and maintenance instructions are observed. The warranty implies that during the
warranty period Stenhøj is committed either to repair or to replace – after own decision - defective spare parts
fitted in the Stenhøj lift. No other warranty claim can be put in under warranty.
IMPORTANT : Spare parts used in the Stenhøj lifts are quality tested and type approved through the Danish
and German safety authorities (Teknologisk Institut / TÜV) and comply with the criteria laid down in DS/EN
1493:2010. Please note that the use of safety spare parts or other essential components which do not fulfill
these criteria may result in the type approval becoming void and the lift will thereby no longer keep the safety
regulations defined by Stenhøj together with the relevant authorities.
Stenhøj’s product/deficiency liability and warranty cannot be claimed if concrete damages or failures are a
result of the use of spare parts not originating from Stenhøj.
CHECK THAT THE NECESSARY LABELS ARE PLACED ON THE LIFT:
Capacity label: Name plate with the following data: