Stengel KSL 5002 EU, User Manual

Page: 114 / 126

34
3. The maximum adjustable countdown-time is 23 hours and 59 minutes
4. Release the P
LUS
and M
INUS
-
BUTTONS
as soon as the desired countdown-time
is indicated on the display. The countdown will begin immediately.
5. The
MINUTE
-
MINDER SYMBOL
remains on the display, so you can see that the
countdown-time is elapsing
6. After a few seconds the display will indicate the time of the day again.
7. At the end of the countdown-time an acoustic signal sounds and the
OVEN
-
IN
-
USE SYMBOL
goes out. The acoustic signal sounds for 7 minutes before it stops.
You can switch off the acoustic signal by pressing any of the programming unit
buttons.
8. If the oven is in use while operating the minute minder function, the oven
WILL NOT be switched off at the end of the countdown-time. YOU
MUST turn the oven function rotary knob and the oven temperature
rotary knob to their OFF positions.
2. The semi-automatic function
This function allows you to set a countdown-time (similar to the minute-minder)
function, however the oven is switched off at the end of the cooking time.
1. Put the food to be cooked in the oven and close the door.
2. Select the temperature and function using the rotary knobs.
3. Press the M
ANUAL
-
BUTTON
(12) three times. The decimal dot (9), the
OVEN
-
IN
-
USE SYMBOL
(8) and the
AUTOMATIC FUNCTION SYMBOL
(7) flash on the display
(indication 00:00).
4. Set the desired cooking time using the P
LUS
(11) and M
INUS
(13)-
BUTTONS
.
5. The maximum adjustable period of time is 10 hours .
6. At the end of the cooking time the appliance is switched off. An acoustic signal
sounds; the
AUTOMATIC FUNCTION SYMBOL
(7) and the
MINUTE
-
MINDER
SYMBOL
(10) flash on the display.
7. Press any of the programming unit buttons to stop the acoustic signal and to
reset the appliance; then press the M
ANUAL
-
BUTTON
twice for 3 seconds. The
time display flashes after the first pressing; after the second one the
OVEN
-
IN
-
USE SYMBOL
occurs on the display and the
AUTOMATIC FUNCTION SYMBOL
(7)
goes out.
8.
WARNING!
When you have stopped the acoustic signal and reset the
appliance, the initial temperature and function settings are activated
again. So you have to set the rotary knobs (temperature and function) to
the OFF-position; otherwise the appliance will start heating again.
3. The end-of-cooking function