Main menu interface
Submenu interface
Description
Unit
SI Metric
The interface displays last height unit setting after entering. Use
or
to choose the
height unit, and press “M” to confirm and save it. The system will exit after 2 seconds.
Inch
Brightness
Low
The interface displayslast handle brightness setting after entering. Use
or
to choose
the brightnesslevel, and press “M” to confirm and save it. The system will exit after 2
seconds.
Normal
High
Beep
Off
The interface displays last buzzer setting after entering. Use
or
to choose the
buzzer condition, and press “M” to confirm and save it. The system will exit after 2
seconds.
On
Collision Force
Off
The interface displays last collision force after entering. Use
or
to choose the
force condition, and press “M” to confirm and save it. The system will exit after 2
seconds.
Light
Normal
Heavy
Set Height
Original
①②
Use
or
to choose the type of
height after entering, and press
“M”
to confirm and enter
corresponding setting interface.
The interface displays last original height setting
after entering. Use
or
to adjust the
setting, and press “M” to confirm and save it.
Low
①③
The interface displays last lowest limit setting after entering. Use
or
to adjust the
setting, and press “M” to confirm and save it.
High
①③
The interface displays last highest limit setting after entering. Use
or
to adjust the
setting, and press “M” to confirm and save it.
Serial Number
The interface alternately displays the customer number and the production date for 20
seconds after entering.
Demo It displays
(Password) enter your password to
continue later operating. (password: 11111)
Off
The interface displays last demo mode setting after entering. Use
or
to choose
demo mode, and press “M” to confirm and save it. The system switches to height display
interface or demo mode interface. Press
to start-up and press
to stop in demo
mode.
2min On,18min
Off
4min / cycle
6min / cycle
10min / cycle
Note:
①
Adjustment resolution is 1 cm or 0.5 inch.
②
Original height refers to the position after reset, it can be adjusted between -20cm and +20cm (or -8inch and +8inch).
③
The highest limit set shall be 20 cm or 8 inch larger than lowest limit.
Page 2 of 2
