INSSTCNP15MA0914
15
mode, the maximum set point of the Security mode, the
Celsius/Fahrenheit mode, the remaining time of the timer and
the maximum floor temperature. These parameters are saved
every minutes when a change occur, except for the Day/Night
mode and the remaining time of the timer, which are saved only
if the Single programming mode was not activated.
Please note that the Single programming mode is not
automatically reactivated when the power is restored, the
icon blinks to indicate that this mode was activated before the
power failure and that is now deactivated. Moreover, when the
power is restored, the Day/Night mode is recovered only if the
Single programming mode was deactivated before. If not, the
Day mode is automatically reactivated. The Security mode is
also reactivated if it was activated before the failure. However,
its icon blinks for 5 minutes and you can deactivate this mode
by simultaneously pressing down the + and - buttons for 10
seconds. The Security mode stays activated if you don’t follow
this process and the icon stops blinking.