Stelpro La Niña Installer'S Manual Download Page 1

Page: 1 / 8

Before installing and operating this product, the user and/or installer must read, understand and follow these instructions and keep them handy for future

reference. If these instructions are not followed, the warranty will be considered null and void and the manufacturer deems no further responsibility for this

product.
This product must be installed by a qualified person and connected by a

certified electrician

, according to the

electrical and building codes

effective

in your region.
The following instructions must be adhered to in order to avoid personal injuries or property damages, serious injuries and potentially fatal electric shocks.
Protect the heating unit with the appropriate circuit breaker or fuse, in accordance with the nameplate.
Make sure the line voltage (volt) is consistent with that indicated on the unit’s nameplate.
This unit must be

grounded.

Switch off the power at the circuit breaker/fuse before installing, repairing and cleaning the unit.
Make sure the unit is appropriate for the intended use (if needed, refer to the product catalog or a representative).
Do not install the unit where objects or pieces of furniture could be damaged by heat.

Respect distances and positions

indicat ed in the installation section.

If the installer or user modifies the unit, they will be held responsible for any damage resulting from this modification, and the UL certification will be void.
This unit must not come into contact with a water source and must be protected from splashes (e.g. a wet mop). Do not use it if any part has been immersed.

INSLAN0314

This unit

complies with

UL standards

Installer’s GUIDe

la nIña

Hand dryer

replacement component list included

ÈM