Stello CDA500
5
OPERATION
Front Panel
Functions
1.
POWER On/Off:
Turn on
„Main‟ power switch located on the upper left corner of the front panel.
2.
INPUT: Selects source - COAX/ OPT/ PC/ CD
(Display shows LOAD first; CD spins, then display shows
playing track and time status, fo
r example, “01 00:45”). To insert disc,
place CD on spindle with printed label
side up. Place stabilizing puck on top of the disc and close the glass cover
3.
UPSAMPLE
: Select 16 bits/44.1 kHZ (BYPASS), 24/96 or 24/192 upsampling by sequentially pressing the
center button under the display window. BYPASS mode is set as default but you can choose either SRC 96K
or SRC 192 based on your preference from your CDs.
4.
TIME
: By pressing the TIME button, the display changes as follows: Current track time increase / current
track time decrease / decrease from total track time.
5. Circular button on the right side, from the top: (
REPEAT,
▶
||
,
■)
From left: (
|
◀
,
▶
|)
PLAY / PAUSE(
▶
||)
:
Press „PLAY‟ (center button on right side of front panel)
to play the disc.
The track number and elapsed time will be displayed. Use this button (same as play button) to pause the
disc. To resume play, press again.
STOP(
■
):
Use this button (bottom on right side) to stop playing the disc.
The CD‟s embedded information will be shown on the display window.
TRACK:
Press this button to skip to the previous or following track. Select the desired track by pressing one
of the arrow buttons, then press PLAY to start the music. While playing, press one of the arrow buttons to
skip tracks. Play will resume automatically on the selection of your choice.
REPEAT
(via remote control)
There are three Repeat functions: REPEAT ALL, REPEAT ONE, and
Summary of Contents for CDA 500
Page 1: ......
