Page <2>
V1.0
14/04/21
Specifications
Part Number
555-29820
555-29825
555-29830
Woofer
40W
60W
80W
Tweeter
8Ω
8Ω
8Ω
RMS Power
70Hz - 20kHz
60Hz-20kHz
50Hz-20kHz
Nominal Impedance
90dB
90dB
90dB
Frequency Response
5.25″ Woven Glass Fibre Cone 6.5″ Woven Glass Fibre Cone
8″ Woven Glass Fibre Cone
Sensitivity(1M/1W)
0.75″ Titanium Dome
0.75″ Titanium Dome
0.75″ Titanium Dome
Dimensions
Ø204mm×78mm (Ø8″×3.1″)
Ø234mm×87mm (Ø9.2″×3.4″) Ø284mm×110mm (Ø11.2″×4.3″)
Cutout Size
Ø179mm (Ø7″)
Ø210mm (Ø8.3″)
Ø258mm (Ø10.2")
Safety Instructions
• Please read the instructions carefully before installation and use. Keep the manual safe for future reference.
• Prior to installing the speakers into any ceiling/wall, check the structure for weight bearing ability and avoid contact with any
wiring or plumbing that might be behind the surface area. Installing on soft materials or in areas incapable of supporting the
speakers’ weight may cause personal injury or damage to the speaker.
• Make sure the speaker is properly secured to the ceiling/wall. Please use the proper screws, bolts, or anchors. Failure to do
so may cause the speaker to become unsecured and cause potential damages/injuries.
• Damage to the woofer and tweeter may occur if the speaker is dropped or hit-resulting in no sound or distorted sound.
• Never overdrive your speakers to the point of distortion and always reduce volume prior to switching input sources.
• Use only approved and certified wiring in your installation, do not stretch or place the wire in contact with sharp objects.
• Prior to removing cables ensure all power to your amplifier and other components is turned off.
Preparation
The hardware equipment listed below is needed to install the speaker.
Packing List
Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or
faulty, contact your place of purchase for a replacement.
