•
Press
MODE
to choose the desired operating mode. Repeatedly pressing the MODE button will scroll through
the various modes: DMX Channel, Slave, Sound Activated, Static Color, Preprogrammed, and Automatic
•
Once in a desired mode, press
SETUP
to make changes, using the
UP
or
DOWN
buttons
Built-in Program Mode
•
Press the
MODE
button multiple times until Prxx is displayed (default is Pr01)
•
There are 10 available programs, each with a unique sequence of lighting fades and chases. Without pressing
the
SETUP
key, press
UP
or
DOWN
keys to choose Pr01 through Pr10
•
While the program is running, press the
SETUP
key, the display will show SPxx. Using the
UP
or
DOWN
keys,
you can choose any numerical value from 00 to 99 to adjust the speed (99 is fastest) that the program runs.
•
From this point, to strobe the lamps, press the
SETUP
key, the display will read F500. Using the
UP
and
DOWN
keys, you can set the unit to strobe. F500 is full on, F501 is slowest rate, F599 is fastest
Auto Run Mode
•
Press
MODE
button multiple times until the display shows AUTO. In this mode, the unit automatically
sequences through its ten available programs described above
Static Color Mode
•
Press
MODE
button multiple times until the display shows GraY. In this mode, the unit lights all five LED
sets steady on
•
You can adjust the brightness of these lights from a setting of 0 to 255 (255 full brightness)
•
With the display showing GraY, press the SETUP button. The display will show C.xxx. Using the UP and
DOWN buttons, you can adjust from off (C.000) to full brightness (C.255).
•
Pressing the SETUP button again, the display will show F5.00 (default is F5.00). This allows setting a strobe
rate
•
Using the UP and DOWN buttons, the strobe rate can be adjusted from F5.00 (slowest) to F5.99 (fastest)
Sound-Activated Mode
•
Repeatedly press the
MODE
button until the display shows SUxx. The display range is SU01~SU31. This is the
sound activated mode, the SUxx number represents the sensitivity, with 31 being the most sensitive
•
Press the
UP
or
DOWN
buttons to adjust the sensitivity
DMX Mode – for use with DMX controller
•
There are three DMX modes, 3-channel, 5-channeland 9-channel
•
Press the
MODE
button multiple times until d.– – – appears
•
Press the
SETUP
key twice and the channel mode will display, either 3 / 5 / 9CH. Use the
UP
and
DOWN
keys to
toggle between these three modes
•
Once the channel mode is set, you can set the beginning DMX channel
•
Press the
SETUP
key again, the display will again display d.001, Using the
UP
and
DOWN
keys, you can set the
beginning DMX channel
DMX Channel Allocations
3CH Mode
