Connections / Controls
1.
DC Power Input
– Supplied AC adaptor provides 24VDC, 3A with 100~240VAC,
50~60Hz input range.
2.
Power ON/OFF Selector
– Turns amplifier power on or off. When on, the blue
LED immediately to the right of this switch will illuminate.
3.
Speaker Output Connection
– Push button terminals accept up to 16AWG wire.
As these are floating output, no speaker connections may be tied to chassis or
earth ground.
4.
Unbalanced Input Connection
– Accepts standard line level signal from
conventional consumer devices such as CD/DVD players, television monitors, tape
decks and tuners.
5.
Sensitivity Adjustment
– Sets the level of the required signal to automatically
power the amplifier ON. Setting this level too high will cause the amplifier to
unnecessarily power on when not in use. Too low and it may possible power off
during long passages of very low volume. Often this adjustment will require some
trial and error.
6.
Left / Right Channel Level Controls
– Independent controls set output level for
the left and right channel amplifiers.
7.
Bass Control
– This control adjusts low frequencies centered at 100Hz, at a rate
of ±10dB.
8.
Treble Control
– This control adjusts high frequencies centered at 10,000Hz, at a
rate of ±10dB.
