2
CONNECTION ILLUSTRATION
※
If you want to distribute 3D source to both of the displays, please make sure all of the sink
devices support the same HDMI 3D video format as the source. The 3D image cannot be
delivered to TVs which do not support 3D video format.
CONNECTION AND OPERATION
Connect the HDMI Splitter to your devices
1.
Connect the HDMI cable from the HD source to the input port of HDMI Splitter.
2.
Connect the HDMI cables from your displays (monitor or projector) to the outputs of the HDMI
Splitter.
3.
Select one of the detection modes. Please refer to QUICK DETECTION MODE SELECTION below.
4.
Plug the 5VDC power supply into the HDMI Splitter.
5.
When connections are completed, the HD signal will be distributed to each HDTV display, and the
LED at front panel will be lighted up to indicate each connected port.
※
For the best performance, you should re-start the power of HDMI splitter to make sure the Splitter
is working well in HDCP between HD player and Display devices, when the HDMI cable was
disconnected after the last time it was used.
※
HDMI 3D video format:
Frame packing
Side-by-Side (Half)
Top-and-Bottom
[email protected]/24Hz
[email protected]/60Hz
[email protected]/24Hz
[email protected]/60Hz
1920x1080i@50Hz
[email protected]/60Hz
1280x720p@50Hz
1280x720p@50Hz
(3D) Blue-ray DVD player
Power Adaptor
HDTV 1
(3D, 4K
×
2K)
HDTV 2
(3D, 4K
×
2K)
